CENTRIFUGE MODEL Z 326 & Z 326K

Both the table top centrifuge Z 326 and the Refrigerated Table Top Centrifuge
Z 326 K offer a wide assortment of rotor options, making them ideal for a wide
variety of research applications. Rotor exchange between swing out, micro, or
high volume angled rotors is very simple and can take place in a matter of seconds.
The Z 326 K includes the refrigeration system on the back side of the unit,
optimized for the lab bench at only 40cm wide.

Specifications
• Maintenance-free induction drive
• Microprocessor with large LCD display
• Motor driven lid lock
• Automatic rotor identifi cation system with over speed protection,
immediately upon rotor insertion
• Active imbalance-identifi cation and -cut off (rotor specific)
• Imbalance tolerant drive
• CFC free refrigeration system
• A large variety of rotors and accessories.
• Manufactured according to international safety regulations, i.e. IEC 1010
• Audible signal at the end of each run with several melody options
• Rotor exchange is easy to handle
• Noise level under 60 dBA at max. speed
• Optimized airfl ow system keeps the samples cool (Z 326).

Distinct Control Panel :
• Simple one handed operation
• Easy to program with gloves on
• Splash proof digital display
• Permanent indication of Preset and Actual Values
• Selection of speed in both rpm and g-force, with increments of 10
• 10 acceleration and 10 deceleration rates, Possibility of unbraked decelaration.
• Preselection of the temperature from - 20°C to 40°C with 1°C increments
• Indication of the sample temperature
• Pre-cooling program option
• Standstill cooling
• Pre-selection of running time from 10 sec to 99h 59min or continous
• Storage of up to ninety runs incl. rotor type.
• Quick-key for short runs
• Diagnostic program.

Technical data Z 326 :
Max. speed : 18000 RPM
Max RCF : 23545 xg
Max. Volume : 4 x 100 ml.
Speed Range: 200 - 18000 RPM
Running Time: 99 H 59 Min / 59 min 50 sec in 1 min / 10 sec increments
Dimensions : 40 x 36 x 48 cm ( W X H X D )
Weight : 43 kg
Power Input: 455 W

Technical Data Z 326 K
Max. speed : 18000 RPM
Max RCF : 23545 xg
Max. Volume : 4 x 100 ml
Speed Range : 200 - 18000 RPM
Running Time : 99 H 59 Min / 59 min 50 sec in 1 min / 10 sec increments
Dimensions : 40 x 36 x 70 cm ( W x H x D )
Weight : 60 Kg
Power input : 660 W

Accessories :
Rotor/Bucket Cat. 221.12 V03
Swing out rotor 4 Places
Acceleration in sec.: 15 / 100
Deceleration in sec.: 15 / 150
max. Speed: 4500 rpm
RCF-value: 3350 xg
max. radius: 14,8 cm
Temp. at max. Speed: -5°C

Cat 220.72 V06
Swing out rotor 4 Places
Angle: 0-90°
605.000 Bucket for Tube Rack

Acceleration in sec.: 15 / 100
Deceleration in sec.: 15 / 150
Max. Speed: 5000 rpm
RCF-value: 3885 xg
Max. radius: 13,9 cm
Temp. at max. Speed: -1°C
605.002 Hermetic lid for bucket

Cat 221.16 V03 Swing out rotor 2 x 3 Microtitreplates
Angle: 0-90°

Acceleration in sec.: 20 / 160
Deceleration in sec.: 15 / 360
Max. Speed: 4500 rpm Tubes
RCF-value: 2739 xg
Max. radius: 12,1 cm
Max. Loading height: 58 mm
max. Loading weight: 310 g
Temp. at max. Speed: 0°C

Cat No.: 221.19 V02
Angle rotor 30 x 15 ml
Angle: 35°

Acceleration in sec.: 15 / 160
Deceleration in sec.: 10 / 380
max. Speed: 4500 rpm
RCF-value: 2829/2467 xg
Max. radius: 12,5/10,9 cm
Max. Ø: 17 mm
Temp. at max. Speed: -9°C

Cat. No.:220.96 V04
Angle rotor 12 x 15 ml
Angle: 28°

Acceleration in sec.: 15 / 100
Deceleration in sec.: 10 / 160
Max. Speed: 6000 rpm
RCF-value: 4185 xg
Max. radius: 10,4 cm
Max. Ø: 17 mm
Temp. at max. Speed: -9°C